No compromises

The GigaCore S30-I is an indispensable part of any AV network where reliability and quick, straightforward setup are required. As a user, you don’t need to make choices or tradeoffs, as GigaCore handles most AV protocols for you out of the box.

PoE+

Entertainment installations constantly push the limits, and the need to deploy PoE-powered devices is continuously increasing. The GigaCore S30-I provides an answer to these scenarios by offering PoE+ on all ports as an option.

AV validated for real applications

GigaCore switches are fully validated in real-world applications with major brands in the AV industry for different protocols, including NDI™, Dante™, AVB/MILAN, RAVENNA/AES67, ST-2110, IPMX, MA-Net, and many more.

We don’t just approve against a protocol but actually test it. Because of real world application validation and interoperability testing, we understand the applications and make sure you can deploy our product with confidence.

Luminex support team really speaks your language and has a vast amount of AV knowledge built up, not just from talking protocols but mainly from working with you and living through your real application network challenges.

Quick overview

• 6 SFP ports | 1 Gbps.
• 24 RJ45 ports | 1 Gbps.
• Easy to configure with ARANEO & WebUI.
• Pre-configured for ProAV – no compromises required.
• Pre-defined Groups (VLANs), Custom
• Groups (VLANs), and Custom Trunk technology with matching color-coded LED indicators per port.
• PoE and non-PoE versions available.

Intelligent fan design | Silent operation

Fans are speed controlled to have minimal noise impact and guarantee a long-life operation.
This allows you to place the GigaCore in the most quiet environments like theaters and studio’s.

Manage and monitor your complete system with Araneo

For optimised consistency, all GigaCore switches can be managed with a single network-wide tool: AraneoAraneo’s online mode shows everything you need to know about the status of your GigaCore network. Data streams and topology are visualized as are the port status of every GigaCore.

Monitor your network with confidence and act before the show gets interrupted!

In offline mode, Araneo lets you plan the complete network topology and GigaCore settings in advance. Reducing network commissioning time to a mere click of a button.Araneo Health Check proactively checks vital parameters of your network and ensures consistency throughout.

Intuitive web UI

The built-in web UI allows you to adjust the settings in an intuitive way. Assigning Groups (VLANS) to ports, creating trunks or adjusting other port- and PoE settings can be done  on the fly and  the status page gives you an overview of the complete switch at a glance. The toolbox page allows management of profiles and lets you upgrade firmware easily.

Consistency in LED colours

Consistent Group (VLAN) colours in the web UI, in Araneo and on the front panel LED’s.

• Most suitable applications: System integrations, Installs
• PoE: PoE+ Optional (up to 300W)
• RLinkX (Link redundancy): Yes
• Groups (VLAN segmentation): Yes
• MultiLinkX (Link aggregation): Yes
• Profile manager: Yes
• Memory: 1 GB RAM – 8 MB NOR flash 4 GB EMMC storage
• MAC address table: 16384 entries
• Address learning / Aging: Self learning, Auto aging
• Switching throughput 64 Byte: 44,4Mpps
• Switching capacity: 60Gbps
• Jumbo frames: MTU up to 120000
• IGMP support: Yes (V1/V2/V3)
• IGMP snooping: Yes, enabled by default
• Port sensing: Auto negotiation
• Auto crossover: MDI / MDIX
• Auto sensing: Full or Half Duplex (Gigabit is Full Duplex)
• TAA Compliance: Yes

• Ethernet connectivity: 24x Gigabit (10/100/1000 BASE-T) copper RJ45 on front panel
• Fiber connectivity: 6x 1 Gbps SFP cages on front panel, independent from other ports
• Ethernet port speed: NA
• Serial: No

• Power connectivity: 1x PowerCON True1 in
• Power input: 100-240VAC, 50-60Hz
• Power consumption:
  • S30-I PoE: max 333W
  • S30-I non PoE: max 30W
• Fuse: NA
• Backup power input: NA
• Backup PoE power input: NA
• PoE: PoE+ Optional (up to 300W)

• Supported protocols: Dante©, RAVENNA/AES67©, Ethersound©, Q-SYS/Q-LAN, sACN, ArtNet, MANet, HogNet, RTTrPL (BlackTraX), IPMX, NDI, IEEE 802.1p CoS (Class of Service), DiffServ (DSCP), IEEE 1588 PTP V2, MILAN AVB, IEEE 802.1as (gPTP) and more…
• Sound protocol compliance: Yes (low jitter)
• Ethernet compliance: IEEE 802.2, IEEE 802.3, IEEE 802.3u, IEEE 802.3x Flow Control, IEEE 802.3ab Gigabit Ethernet, IEEE 802.3af PoE(optional), IEEE 802.3at PoE+(optional), IEEE 802.1ax, IEEE 802.1p CoS, IEEE 802.1d Spanning Tree, IEEE 802.1w Rapid Spanning Tree, IEEE 802.1s Multiple Spanning Tree, IEEE 802.1Q VLAN, IEEE 802.1Qav MVRP, IEEE 802.1 BA-2011 AVB (Audio Video Bridging) IEEE 802.1ab LLDP, IEEE 1588-2008 PTPv2, IETF RFC2710, IETF RFC3810

• Display and jog: NA
• NFC: No
• Configuration: Network wide configuration through Araneo software and/or through the built-in web server
• Status LEDs:
  • Global status LEDs: Device, power and mode
  • Port status LEDs: groups, link/activity and port speed
  • Dark mode available
  • Milan Mode
• Colored RGB LEDs: Yes

• Mounting: Rack
• Enclosure: Robust metal housing
• Dimensions (W x D x H): 482 x 249,6 x 44 mm (19″ x 9,82″ x 1,73″)
• Weight:
  • Device only: 3,30 kg (Non PoE) 3.80 kg (PoE)
  • Packaged: 3,65 kg (Non PoE) 4.3kg (PoE)
• Packaging: 550 mm x 335mm x 68 mm
• Environment:
  • Operating temperature: 0 to +50 °C
  • Storage temperature: -40 to +70 °C
  • Humidity (non condensing): 5 to 95% RH
• Ingress Protection: N/A
• Silent Fan Mode: Yes
• Noise level @1m: TBC
• BTU:
  • S30-I PoE: max 214.96 BTU/hr
  • S30-I non PoE: max 102.36 BTU/hr
• Certificates/Approvals: cSGSus Mark (UL), CE Mark, UKCA Mark, CB certificate, RoHS
• Standards: IEC 62368-1, UL 62368-1, CAN/CSA C22.2 No. 62368-1, EN 62368-1, FCC Part 15 CFR 47, CAN/ICES-003, EN 55032, EN 55024

• LU0100106-1G - GigaCore S30-I-24R1-6S1
• LU0100106-1G-PoE - GigaCore S30-I-24R1-6S1-POE

Disclaimer: Luminex LCE operates a policy of continuous development. Luminex LCE reserves the right to make changes and improvements to any of the products described on this website without prior notice. Specifications are subject to change without notice. Please refer to the manufacturer’s web page for the most up-to-date specifications and product details. www.luminex.be

For the most up-to-date Software and Firmware, visit www.luminex.be/support-2