Features:

• Four powerful RGBW LED cells with sizing and spacing matching traditional linear blinders
• Individual cell control for effects and amber shift for tungsten emulation
• IP65 housing for the most demanding environments with a virtually limitless ‘building block’ rigging system

LIGHT SOURCE

• Source: 4x75W RGBW LED
• Luminous flux: (24°) 5393 lm, (40°) 6260lm
• Lux: (24°) 2413lux @3m full
• Lux: (40°) 891lux @3m full
• Source life expectancy: >50.000 h

OPTICS

• Beam angle: (inc) 24° – (opt) 40°
• Field angle: 46°
• Pixel pitch: 150mm / 5.91”
• Lens diameter: 100mm / 3.94”
• Lens type: dichroic parabolic reflector in combination with HD fresnel lens
• Additional optics: 40°(opt), 32° without magnetic lens
• Other: Magnetic replacement of front lens

COLOUR SYSTEM

• Colour mixing: RGBW/FC
• CTC: CTC control through independent DMX channel
• White presets: 2000~8000K
• Colour wheel: virtual colour wheel with presets

DYNAMIC EFFECTS

• Pixel patterns: pre-programmed dynamic and static patterns
• FX generator: adjustable foreground/background colour, index, speed, direction
• Static colour mode: selection of static colour
• Manual colour mode: manual adjustment of colour
• Auto mode: built-in programs with execution speed adjustment
• Special features: Halo DWE dimming and amber-shift simulation

BODY

• Hardware on-board: on board mechanics for modular assembly of multiple fixtures
• Body: sturdy die-cast aluminium body conceived for long-time durability
• Body colour: black

CONTROL

• Protocols: DMX512, RDM
• DMX channels: HALO 1/4ch – STD 4/6/15ch – EXT16/21/27channel
• Pixel control: pixel2pixel control
• RDM: RDM ready for fixture remote monitor and settings
• Display: black OLED touch display
• Firmware upgrade: yes, via USB-DMX interface (UPBOX1) not included
• Master/Slave: for synchronized operation of more units linked in a chain

ELECTRONICS

• Dimmer: linear 0~100% electronic dimmer
• Dimmer curves: 4 different dimming curves available
• Strobe / shutter: 1-28 Hz, electronic
• Battery backup: battery backup for user operation without connecting to the main power
• Operating temperature: -20° ~ +45°
• Flicker: flicker free operation

ELECTRICAL

• Power supply: 100-240V – 50/60Hz
• Power consumption (at 230V): 227W
• Power consumption (at 120V): 230W
• Output (at 230V): 16 units on a single power line
• Output (at 120V): 8 units on a single power line

PHYSICAL

• Cooling: natural cooling of the peculiar chassis and to absence of fans
• Sospension and fixing: hanging bracket suitable for safe hanging and positioning
• Signal connection: IP DMX 5p IN/OUT, IP Art-Net Neutrik IN/OUT
• Power connection: IN/OUT Neutrik TRUECON
• IP rating: 65 for temporary outdoor application, not for fixed installation
• Dimensions (WxHxD): 24.37”x6.57”x10.39” / 619x167x264mm
• Weight: 17.64lbs / 8kg

To learn more about Photometrics, Software & Certificates, click here.

Disclaimer: PROLIGHTS reserves the right to make changes and improvements to any of the products described on this website without prior notice. Specifications are subject to change without notice. Please refer to the manufacturer’s web page for the most up-to-date specifications and product details. prolights.it.

For additional downloads and support, visit: prolights.it/support